Throttle Cable - Can-Am OUTLANDER 6x6 2021 Series Operator's Manual

MAINTENANCE PROCEDURES
NOTICE
Use ONLY the recom-
mended type of oil.
The oil should be level with the bottom
of the oil level orifice.
NOTICE
Do not overfill.
Install the oil level plug with its O-ring.
Tighten plug to specification.
TIGHTENING TORQUE
Oil level plug
Wipe off any spillage.
Dispose gearbox oil as per your local
environmental regulations.

Throttle Cable

Throttle Cable Lubrication
The throttle cable must be lubricated
with silicone based lubricant or an
equivalent.
WARNING
Always use a silicone-based lubri-
cant. Using another lubricant (like
a water-based lubricant) could
cause the throttle lever/cable to
become sticky and stiff.
Open the throttle lever housing.
______________
134
5 N•m ± 0.6 N•m
(44 lbf•in ± 5 lbf•in)
V07I0FY
1. Remove these screws
Separate the housing.
Slide rubber protector back to expose
throttle cable adjuster.
1
V07I0GY
1. Cable protector
2. Throttle cable adjuster
3. Lock nut
4. Throttle lever housing
Screw in the throttle cable adjuster.
Remove inner housing protector.
1
2 3 4