Lifting And Supporting The Vehicle; Front Of Vehicle; Rear Of Vehicle - Can-Am MAVERICK X3 Series 2017 Operator's Manual

LIFTING AND SUPPORTING THE VEHICLE

Front of Vehicle

Place vehicle on a flat non slippery
ground.
Ensure vehicle shift lever is set to
PARK.
Install an hydraulic jack under the round
tube.
219001761-079_a
FRONT OF VEHICLE
1. Hydraulic jack position
Lift front of vehicle and install a jack
stand on each side under frame as
shown below:
219001761-129_b
JACK STAND POSITIONS - FRONT OF
VEHICLE
Lower hydraulic lift and ensure vehi-
cle is supported safely onto both jack
stands.

Rear of Vehicle

Place vehicle on a flat non slippery
ground.
Activate 4WD mode.
Ensure vehicle shift lever is set to
PARK.
Install an hydraulic jack under the vehi-
cle.
219001761-080_a
REAR OF VEHICLE
1. Hydraulic jack position
Lift rear of vehicle and install a jack
stand on each side under frame as
shown below:
219001761-129_a
JACK STAND POSITIONS - REAR OF
VEHICLE
Lower hydraulic lift and ensure vehi-
cle is supported safely onto both jack
stands.
_______________
77