LIFTING AND SUPPORTING THE VEHICLE
Front of Vehicle
Place vehicle on a flat non slippery
ground.
Ensure vehicle shift lever is set to
PARK.
Install an hydraulic jack under front skid
plate.
tmo2013-003-014_a
FRONT OF VEHICLE
1. Hydraulic jack position
Lift front of vehicle and install a jack
stand on each side under frame as
shown below:
tmo2014-005-008_a
FRONT OF VEHICLE
1. Jack stand positions
Lower hydraulic lift and ensure vehi-
cle is supported safely onto both jack
stands.
Rear of Vehicle
Place vehicle on a flat non slippery
ground.
Activate 4WD mode.
______________
66
Ensure vehicle shift lever is set to
PARK.
Install an hydraulic jack under the vehi-
cle.
tmo2013-003-016_a
REAR OF VEHICLE
1. Hydraulic jack position
Lift rear of vehicle and install a jack
stand on each side under frame as
shown below:
tmo2014-005-008_b
REAR OF VEHICLE
1. Jack stand positions
Lower hydraulic lift and ensure vehi-
cle is supported safely onto both jack
stands.