Hue; Saturation; Black Level; Gamma - IDK MSD-72 Series User Manual

9.4.4 HUE

Menu Top→IMAGE EFFECT→INPUT HUE
Setting for Each input channel, each input signal
Setting value 0°to 359° [Default]: 0°
You can set HUE of input signal.
Note:
This menu can be set up to 359°, but if the dot clock of input signal exceeds 170 MHz, it is treated as 0°. In
this case, "*" is displayed on the VFD screen.

9.4.5 Saturation

Menu Top→IMAGE EFFECT→INPUT SATURATION
Setting for Each input channel, each input signal
Setting value 0% to 200% [Default]:100%
You can set the saturation of input signal.
Note:
This menu can be set up to 200%, but if the dot clock of input signal exceeds 170 MHz, it is treated as 100%.
In this case, "*" is displayed on the VFD screen.

9.4.6 Black level

Menu Top→IMAGE EFFECT→INPUT SETUP LEVEL
Setting for Each input channel, each input signal
Setting value -100% to +100% (by 0.5%) [Default]: ±0.0%
You can adjust the black level of input signal.

9.4.7 Gamma

Menu Top→IMAGE EFFECT→OUTPUT GAMMA
Setting for Each output channel
Setting value 0.1 to 3.0 (0.1 steps) [Default]: 1.0
You can adjust the gamma of output signal.
59
MSD-72 Series User's Guide