Contact Closure - IDK MSD-72 Series User Manual

MSD-72 Series User's Guide

7.2.5 Contact closure

The MSD has 9 channels contact closure for external control.
One (1) connector has three (3) channels, and it can do the opening and closing operation of the relay
individually. The maximum peak load for each contact is 24 VDC 500 mA.
Fix a cable to the attached 6-pin terminal block, and then connecting to the MSD.
IDK recommends using AWG 28 to AWG16 cable. The maximum peeling length is 7 mm (0.28 inch approx.)
[Figure 7.6] Connecting cable to 6-pin terminal block connector
28
Up to 7 mm (0.28 inch approx.)
1
2
3