9.3.7 Display size
Menu
Top→OUTPUT TIMING→INPUT SIZE (Input side) / OUTPUT SIZE (Output side)
Setting for
Input side
Output side : Each output channel
Setting value
Input side:
Horizontal size
Vertical size
Output side:
Horizontal size
Vertical size
You can set the display size of input video.
The video size is scaled based on the upper left of the input video.
If you set "LINK" to "ON", only settings of "H"(Horizontal) can be set and "V" is set automatically with the
current aspect ratio kept.
Notes:
・If the resolutions of each output are not the same, the output resolution of OUT1 will be the standard.
・Numbers following "/" show the output resolution
: Each input channel, each input signal
(Horizontal output resolution÷4
[Default] Horizontal output resolution)
(Vertical output resolution÷4
[Default] Vertical output resolution)
(Horizontal output resolution÷4
[Default] Horizontal output resolution)
(Vertical output resolution÷4
[Default] Vertical output resolution)
to Horizontal output resolution x 4
to Vertical output resolution x 4
to Horizontal output resolution x 4
to Vertical output resolution x 4
55
MSD-72 Series User's Guide
【See: 9.3.6 Display position】