Table of Contents
Advertisement
MSD-72 Series User's Guide
9.11.2 LAN operation mode
Top → LAN → FUNCTION
Menu
Setting for
Each connection
Setting value [Table 9.17] Setting items of LAN operation mode
Setting
Operation mode
Destination IP address
PJLink protocol connection
Destination connection port
*1
number
PJLink protocol password
1
*
If selecting "ON" for PJLink protocol, the target port number is fixed at "4352".
*2
Up to 32 characters. If you do not want the password authentication, you do not need to set the item.
You can set the LAN operation mode consisting of "RECEIVER" mode that controls the MSD externally and
"TRANSMITTER" mode that controls peripheral devices from the MSD.
If you select "TRANSMITTER" mode, you need to set the information of connecting device.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
94
[Table 9.17] Setting items of LAN operation mode
Receiver mode
RECEIVER [Default]
Not necessary
Not necessary
Not necessary
*2
Not necessary
Operation mode
Transmitter
TRANSMITTER
0.0.0.0 to 255.255.255.255
[Default] 192.168.1.198
ON: Use
OFF: Not use [Default]
1 to 65535 [Default]: 1100
20, 30 to 39, 41 to 5A, 61 to 7A in ASCII code
(in hex) [Default]: 20 (space)
Advertisement
Table of Contents
