8.8.2 How to use WEB menu
Menu
①
Select the target item from the menu.
Setting items will be displayed in the sub menu.
If the setting item can be set for each input or output side, the display can be changed using the
pull-down menu, "IN/OUT", placed at the right side of the submenu.
②
If there is a setting item that can be set for each channel, channel tab will be displayed.
③
Set the each setting from the submenu by following the table below.
Button name
Execution
button
Pull-down list
Spin button
Slider bar
Check box
Radio button
Tip:
You can change the channel name displayed in the tab from "NAME EDIT" in the "CROSS POINT".
Tab
Submenu
[Fig. 8.6] WEB menu
[Table 8.17] Button for setting
Button
Exexutes the target operation.
Selects the desired value.
Selects the desired value.
You can type the desired value directly in the text area.
You can move the slider to set the desired value.
Enables and disables by clicking or unclicking the box.
Selects the desired value.
47
MSD-72 Series User's Guide
IN/OUT
Description