Renault Laguna III Manual page 3354

Quarter panel lining: Description
D91
No. Description
(1) Front shoulder
harness
forcement
(2) Quarter panel
lining
(3) Rear roof drip
moulding lining
(4) Rear grab han-
dle mounting
bridge piece
(5) Quarter panel
outer rear stiff-
ener
(6) Luggage com-
part m e n t
hinge mounting
reinforcement
(7) Roof drip mould-
ing rear rein-
forcement
(8) Seat opening
control support
bridge piece
(9) Mounting bridge
piece of quarter
panel upper sec-
tion trim
II - PART FITTED
1 - Replacement of outer wheel arch
WARNING
Respect the position of this cut which has been
determined in accordance with the position of the
inner stiffeners or acoustic inserts, in order to pre-
vent damaging the parts (inner stiffener and/or
acoustic insert).
REAR UPPER STRUCTURE
Type Thick-
ness (mm)
Mild 1.8
rein- steel
Mild 0.8
steel
Mild 0.7
steel
Mild 1.3
steel
Mild 0.8
steel
Mild 1.5
l i d steel
Mild 1
steel
Mild 1.5
steel
Mild 1.2
steel
44A-34
44A