Renault Laguna III Manual page 3288

Windscreen pillar lining: General description
Note:
The information contained in the following
describes the general repair procedure for all vehi-
cles having the same design for this part.
Before reading the following general information,
make sure that there are no special notes associ-
ated with the vehicle. These special notes are spec-
ified if necessary in other parts of the sub-section
dealing with the component.
Note:
For a detailed description of a particular connec-
tion, see MR 400.
DESIGN OF THE STRUCTURAL COMPONENT
The distinctive feature of this part is that it combines
three functions:
- windscreen A-pillar lining (1) ,
- front roof drip moulding lining (2) ,
- B-pillar upper lining (3) .
If there are other issues regarding access to mating
faces, the various replacement options are described
in the basic instructions for structural bodywork repair
(see MR 400).
SIDE UPPER STRUCTURE
110495
43A-2
43A