Renault Laguna III Manual page 3393

Front side door: Stripping - rebuilding
- the tyre pressure label,
- the foam pads.
a Order a door fitting kit in addition.
II - REBUILDING OPERATION FOR PART
CONCERNED
a Refit:
- the driver's or passenger's front side door wiring
(see Driver's front side door wiring: Removal -
Refitting) or (see Passenger's front side door
wiring: Removal - Refitting) (MR 415, 88A, Wir-
ing),
- the side impact sensor (see Side impact sensor:
Removal - Refitting) (MR 415, 88C, Airbags and
pretensioners),
- the front side door check strap (see Front side
door check strap: Removal - Refitting) (MR 416,
51A, Side opening element mechanisms),
- the front side door lock (see Front side door lock:
Removal - Refitting) (MR 416, 51A, Side opening
element mechanisms),
- the front side exterior door handle (see Exterior
door handle: Removal - Refitting) (MR 416, 51A,
Side opening element mechanisms),
- the front side door lock barrel (see Front side door
lock barrel: Removal - Refitting) (MR 416, 51A,
Side opening element mechanisms),
- the front side door electric window winder mecha-
nism (see Front side door electric window
mechanism: Removal - Refitting) (MR 416, 51A,
Side opening element mechanisms),
- the front speakers (see Front speakers: Removal
- Refitting) (MR 415, 86A, Radio),
- the front side door sliding window (see Front side
door sliding window: Removal - Refitting) (MR
416, 54A, Windows),
- the window winder motor (see Electric window
motor: Removal - Refitting) (MR 415, 87D, Elec-
tric windows - Sunroof),
- the front side door glass run channel (see Front
side door window run channel: Removal - Refit-
ting) (MR 416, 66A, Window sealing),
- the anti-fouling seal,
- the front side door pillar exterior trim (see Front
side door pillar exterior trim: Removal - Refit-
ting) (MR 416, 56A, Exterior equipment),
- the front side door frame interior trim (see Front
side door frame interior trim: Removal - Refit-
ting) (MR 416, 72A, Side opening elements trim),
SIDE OPENING ELEMENTS
- the front side door moulding (see Front side door
protective strip: Removal - Refitting) (MR 416,
55A, Exterior protection),
- the front side door exterior weatherstrip (see Front
side door exterior weatherstrip: Removal - Re-
fitting) (MR 416, 66A, Window sealing),
- the door mirror (see Door mirror: Removal - Re-
fitting) (MR 416, 56A, Exterior equipment),
- the front side door sealing film (see Door sealing
film: Removal - Refitting) (MR 416, 65A, Door
sealing),
- the front side door trim (see Front side door trim:
Removal - Refitting) (MR 416, 72A, Side opening
elements trim).
III - FINAL OPERATION.
a Connect:
- the supply connector to the front side door wiring
harness,
- the battery (see Battery: Removal - Refitting)
(MR 415, 80A, Battery).
a Unlock the airbag computer. Apply the after repair
procedure using the Diagnostic tool :
- connect the Diagnostic tool,
- select « Airbag computer » ,
- go to repair mode,
- apply the « After repair procedure » .
47A-4
47A