Call Report; Vmie Protocol - Siemens HiPath 1100 Series Programming Manual

Call Report

Step by Step
Type of Call (TOC)
Required
1
Fixed size: 4 characters
Format: "***n" (n = code from table below)
Code Type of Call
1 Internal for Voice Mail
3 Call Forwarding (*11)
5 Not used
7 Not used
Calling extension
Required
2 Fixed size: 6 DTMF signals
Format: "****i" (i = calling extension)
External call format: always "******"
138
Call Report
CallReport is a billing system that records information
on PABX system activity, such as calls received and
calls made.
CallReport operates in a regular PC under a Windows
95 / 98 /NT 4.0 / 2000 / XP environment. It periodically
receives data originating from the PABX that are then
processed and stored in a computer hard drive, identi-
fying extension, time, duration, branch, exit route and
cost of call. Subsequently, it can generate reports
containing total cost by extensions, sectors, and
groups, among others, in addition to incoming and
outgoing traffic reports.
All the information is specified in the CallReport
database and can be manipulated by the user logged in
as Administrator.

VMIe Protocol

Voice Mail analog connections require the VMIe proto-
col (Voice Mail Interface - extended). Voice Mail commu-
nication is carried out in the form of DTMF signals
consisting of the following information:
Code Type of Call
2 Not used
4 Second Attendant (*14)
6 Not used
8 Not used
Note: if an extension is
longer, the DTMF digit "*"
in the protocol is replaced
by the additional extension
digit.