Table of Contents
Advertisement
Chapter 4 Maintenance
Maintenance
Maintain the machine regularly or as necessary so that its
accuracy will be maintained and it can continue to be
used for a long time.
Precautions for Maintenance
Pay attention to the following items when maintaining this
machine.
• When using cleaning solution for maintenance, be
sure to wear the supplied safety glasses and
gloves.
• Never disassemble the machine.Disassembling it
can result in electric shock hazards or damage to
the machine.
Before maintenance, be sure to turn off the power
switch and unplug the power cable; otherwise, an
unexpected accident may occur.
• Prevent moisture from entering the
machine.Moisture inside the machine can cause
electric shock hazards or damage to the machine.
• To ensure stable ink jetting, it is necessary for the
machine to eject a small amount of ink (flushing)
regularly when a printing (outputting) operation
has not been performed for a long time.
• When the machine is not to be used for a long
time, turn off only the power switch on the front
side, leave the main power switch at the right side
turned ON (in the position of | ), and leave the
power cable connected.
• Do not wipe the nozzle face of the heads, wiper,
caps, etc. with water or alcohol.Doing so can
cause nozzle clogging or machine failure.
• Do not use benzene, thinner, or any chemical
agent containing an abrasive.Such materials can
deteriorate or deform the surface of the cover.
• Do not apply a lubricant, etc. to any parts inside the
machine. Doing so can cause printing failure.
• Be careful that the cleaning solution, ink, etc. not
to stick to the cover because this may cause the
surface of the cover to deteriorate or deform.
About Cleaning Solution
Use the cleaning liquid dedicated for the ink being used.
Type of Ink
Sublimation dye ink:Sb610
4-2
Applicable maintenance
washings
Washing liquid 03 Maintenance kit
(ML003-Z-K1) [Sold separately]
Cleaning the Exterior Surfaces
When the exterior surfaces of the machine are stained,
dampen a soft cloth with water or a neutral detergent
diluted with water, squeeze it, and wipe the surfaces with
the cloth.
Cleaning the Platen
The mist generated by the printing operation may adhere
to the platen and contaminate the media, so please clean
it.
• When the platen is stained with ink, wipe it off
with a paper towel containing a small amount of
cleaning solution for maintenance.
• If ink adheres to the end face of the media and
becomes dirty, be sure to clean it.
• If ink adheres frequently, we recommended to set
the vacuum fan to "weak" or "standard".
• Before cleaning the platen, make sure that the
platen has cooled adequately.
• Because dust and dirt are easily accumulated in
the slots for holding a media and cutting paper
(cutter line), be sure to clean these parts carefully.
Advertisement
Table of Contents
