Setting Of Drying Time; Setting Of Feed Speed - MIMAKI Tx300P-1800B Operation Manual

Chapter 3 Setup

Setting of Drying Time

In the drying time setting, the following items for ink drying
time are set.
• SCAN : Ink drying time for each scanning is set. (During
bidirectional printing, the machine stops for a
certain period of time specified for each of the
outward and return scanning.)
• PRINT END : Ink drying time after printing has been complete
is set.
• When you give priority to the setting at the
RasterLink side, make the setting value "Host".
• "SCAN" set in this machine is displayed as "Pause
Time per Scan" in the RasterLink.
• You cannot specify the print end at the RasterLink
side. When you set this machine to "Host", printing
will be performed in "PRINT END= 0 min." status.
Press
1
Press
2
and press the
• SETUP MENU will be displayed.
Press
3
Press
4
and press the
Press the
5
Press
6
time, and press the
• Set the drying time for canning and after printing
is completed. To enable the drying time specified
in your RIP, select "Host".
• Scanning setting value:
Host or 0.0 sec. to 9.9 sec.
• Print end setting value:
Host or 0 sec. to 120 minutes.
• Item selecting:by the [][] keys
• Time setting: by the [][] keys
Press the
7
end the setting.
3-8
(MENU) in LOCAL.
to select SETUP 1 to 4,
key.
(>>) .
to select "DRYING TIME",
key.
key.
to set drying
key.
key several times to

Setting of Feed Speed

Changes the media feeding speed in printing.
Press
(MENU)
1
Press to select SETUP 1 to 4,
2
and press the
• SETUP MENU will be displayed.
Press (>>) .
3
Press to select "FEED SPEED",
4
and press the
Press the
5
Press to select a set value, and
6
press the
• Set value: HOST / 10 to 100%
Press the
7
end the setting.
• Depending on a print condition, there is a setting
value by which the speed is not changed.
in LOCAL.
key.
key.
key.
key.
key several times to