MIMAKI TS55-1800 Operation Manual page 83

8
Clean the cap rubber.
• Wipe off the ink sticking to the cap rubber with a
clean stick dipped in cleaning solution for
maintenance.
• Wipe off so that cleaning solution for maintenance
will not remain.
• At this time, the discharge passage is cleaned
automatically.
9
Close the front cover, and press the
key.
• When the cleaning liquid cartridge is enabled, the
cap is automatically filled with cleaning solution.
• When the cap is full of cleaning solution, cleaning
solution confirmation instructions are displayed.
• If the front cover is not closed, the cap is
not automatically filled with cleaning
solution. If the front cover is open, make
sure you close it.
• When the cleaning liquid cartridge is not
enabled, the cap is not automatically
filled with cleaning solution.
Open the front cover and fill the cap with
the maintenance cleaning solution using
a dropper.
After filling up the cleaning solution, per-
form operations from step 11.
10
When a message is displayed, open the
front cover and check the amount of
cleaning solution in the cap.
Cap Rubber
• If the cleaning solution is not full of cap, fill the cap
with the maintenance cleaning solution with a
dropper.
11
Close the front cover, and press the
key.
12
Press to set how long the
cleaning solution should remain.
• Set value: 1 to 99 min. (1 minute increments)
13
Press the
• The nozzles are washed.
• When the nozzles have been completely washed,
the head moves to the maintenance position.
14
Fill up the cap with cleaning solution for
maintenance.
• When the cleaning liquid cartridge is enabled, the
cap is automatically filled with cleaning solution.
• If the front cover is not closed, the cap is
not automatically filled with cleaning
solution. If the front cover is open, make
sure you close it.
• When the cleaning liquid cartridge is not
enabled, the cap is not automatically
filled with cleaning solution.
Open the front cover and use the drop-
per to fill up the cap with cleaning solu-
tion until it is almost overflowing from the
cap.
After filling up the cleaning solution, per-
form operations from step 16.
Chapter 4 Maintenance
key.
4-11
1
2
2
4
5
6