Table of Contents
Advertisement
Function name
Mail Delivery
(
P.3-18)
Select Event
(
P.3-18)
Mail Address
(
P.3-18)
EVENT MAIL
Message Subject
(
P.3-18)
Server Setup
(
P.3-19)
Transmit Test
(
P.3-20)
Auto Remote
(
P.3-21)
Lighting Up Type
I l l u m i n a t i o n
Lighting Up
(
P.3-21)
Extention
Start Up Lighting
Feeding before cut (
P.3-21)
RESE T(
P.3-21)
*1. Settable when both of DHCP and AutoIP are [OFF]
*2. Settable only when Auth. is not OFF
*3. Settable only when Auth. is POP before SMTP
Set value
ON / OFF
Print Start
ON / OFF
Event
Print End Event ON / OFF
Plot Start Event ON / OFF
Plot End Event
ON / OFF
Error Event
ON / OFF
Warning Event
ON / OFF
Other Event
ON / OFF
Set the e-mail address to which
you send the event mail.
Set the characters to write in the
subject of the event mail.
SMTP Address
SMTP Port No.
SENDER ADDRESS
POP before
SMTP
Authentication
SMTP
Authentication
OFF
*2
User Name
Pass Word *2
*3
POP3 Address
APOP *3
Send the test e-mail.
ON / OFF
Auto / Manual
None / 1~5~10min
ON / OFF
ON / OFF
Meaning
Set whether you send/ do not send the e-mail
when the set event occurs.
Set whether you send/ do not send the e-mail at
the start of printing.
Set whether you send/ do not send the e-mail at
the end of printing.
Set whether you send/ do not send the e-mail at
the start of plotting.
Set whether you send/ do not send the e-mail at
the end of plotting
Set whether you send/ do not send the e-mail
when a error occurs.
Set whether you send/ do not send the e-mail
when a warning occurs.
Set whether you send/ do not send the e-mail
when an event other than the above occurs.
Alphanumeric characters and symbols (within 96
characters)
Alphanumeric characters and symbols (within 8
characters)
Set the SMTP server.
Set the SMTP port number.
Set the e-mail address to be used as the sender
mail address.
Set the SMTP server authentication method
(SMTP authentication).
Set the user name used for the authentication.
Set the password used for the authentication.
Set the POP server.
Set ON/OFF of APOP.
When data is received in the local mode, it
automatically switches to the remote mode and
sets whether to start printing.
Set the lighting / extinguishing method for
printing operation and maintenance work (cover
open etc).
When "Auto" is selected, set the time to continue
lighting etc. after printing operation.
Set whether to turn ON / OFF at the time of unit
startup.
You can disable the media feed operation at the
time of media cut execution.
All setting values are returned to the status
default.
Chapter 3 Setup
1
2
3
4
5
6
3-13
Advertisement
Table of Contents
