Chapter 6 Appendix; Specifications; Machine Specifications - MIMAKI TS55-1800 Operation Manual

Chapter6 Appendix

Specifications

Machine specifications

Item
Method
Print head
Specification
Printing mode (scan x feed)
Usable inks
Ink supply
4-colors
6-colors
Capacity of ink
pack
7-colors
8-colors
Usable media
Max. printing width
Maximum
Minimum
Thickness
Roll outside
diameter
Roll Media size
Roll weight
Roll inside diameter
Printing surface
Roll end treatment
Margin Roll media
Absolute accuracy
Distance accu-
racy
Reproducibility
Perpendicularity
Media skew
Head height adjustment
Cutting of media
Media delivery
Waste ink tank
Print data transmis-
sion function
Interface
Mail function
Command
during standby
during continuous
Noise printing
during discontinu-
ous printing
6-2
Drop-on-demand piezoelectric print heads
4-Head
360×360dpi/ 480×600dpi/540×360dpi/ 600×600dpi/720x600
720×1080dpi
9 colors (Y, M, Bl, K, LBl, Lm, Lk, FP, FY)
Supplying from ink packs through tubes.
Ink pack replacement type:
Supplying by Toggle switch over with 2 packs/color
(4-colors/6-colors ink set: M, Bl 7colors ink set: M)
Y, M, Bl, K: 2L-ink pack x 2 for each color
Y, K, LBl, Lm: 2L-ink pack x 1 for each color
M, Bl: 2L-ink pack x 2 for each color
Y, K, Bl, LBl, Lm, Lk: 2L-ink pack x 1 for each color
M: 2L-ink pack x 2
Y, M, Bl, K, LBl, Lm, FP, FY: 2L-ink pack x 1 for each color
Duplex paper
1,940 mm (76.4 in)
1,950 mm (76.8 in)
210 mm (8.3 in)
1.0 mm or less (0.04 in or less)
Paper media: Φ250 mm or less (Φ9.8 in or less)
*2
*2, *3
45 kg or less (88.2 lb or less)
2 or 3 inches
Side facing outward
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for
easy removal.
Left end and right end: 15 mm (Default) Front: 120 mm Rear: 150 mm
(Left end and right end: 0.6 in (Default) Front: 4.7 mm Rear: 5.9 mm)
Whichever the larger one of ± 0.3 mm or ± 0.3% of the designated
(Whichever the larger one of ± 0.01 in or ± 0.3% of the designated)
Whichever the larger one of ± 0.2 mm or ± 0.1% of the designated
(Whichever the larger one of ± 0.008 in or ± 0.1% of the designated)
± 0.5 mm / 1,000 mm (± 0.02 in / 39.4 in)
5 mm or less / 10 m (0.2 in or less / 32.8 ft)
Low (2.8mm) / Mid (3.3mm) / High (3.8mm)
(Low (0.11 in) / Mid (0.13 in) / High (0.15 in))
Cutting of Y direction by the head cutter.
Cutting accuracy (steps): 0.5 mm or less (0.02 in or less)
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Bottle type: 2,000 cc (2 liters)
USB 2.0 Hi-speed, Ethernet 1000BASE-T
Ethernet 10 BASE-T / 100 BASE-TX / 1000BASE-T
MRL- V
Less than 58 dB (A) (FAST-A, Front & Rear & Left & Right 1 m (39.4 in))
Less than 65 dB (A)
Less than 70 dB (A)
TS55-1800
*1
/720×720dpi/