Replacing The Cap - MIMAKI TS55-1800 Operation Manual

Chapter 4 Maintenance
5
Open the front cover.
6
Remove the fitting.
• Pull out the fitting by holding the protrusions at
both ends.
7
Remove the wiper cleaner.
• Pull it to the front to remove it.
8
Insert a new wiper cleaner.
• Slide it all the way in to install it.
4-18
9
Attach the fitting.
Carriage
10
When replacement is complete, press the
11
Close the front cover, and press the
• After its initial operation, the machine returns to
step 1.

Replacing the Cap

The cap (PN:SPC-0842) is a consumable item. If the cap
becomes dirty or gets scratches, or nozzle drop outs do
not change even after cleaning (suction failure), replace
with the new cap.
• The Cap is an optional item. You can buy one
through your local dealer or from our service
office.
1
Press
2
Press
"MAINTENANCE", and press the
• The MAINTENANCE menu is displayed.
3
Press
MAINT.", and press the
4
Press
OUT", and press the
• The carriage moves over the platen.
5
Open the front cover.
key.
key.
(MENU) in LOCAL.
to select
key.
to select "STATION
key.
to select "CARRIAGE
key.
Carriage