Intel Agilex Configuration User Manual page 94

Command Code
(Hex)
14
GET_DESIGNHASH
32
QSPI_OPEN
(10)
This number does not include the command and response header.
Intel ® Agilex ™ Configuration User Guide
94
Command Response
(10) (10)
Length Length
5
6
7
1 3 The GET_DESIGNHASH command is little-endian. This command returns a number that is the 3 least
significant words of the hash value. Number format is 0x(Byte N-1)(Byte N-2)...(Byte2)(Byte1)(Byte0).
In contrast, the Assembler reports a complete hash value as hex stream, with byte ordering from low to
high, (Byte0)(Byte1)(Byte2)... (Byte N-2)(Byte N-1).
For example, for the design hash value dbe4554730f6bb487e52eb31cc68b194 from the Assembler
report (
0x31eb527e48bbf6304755e4db.
0 0 Clients use this command to request exclusive access AS x4 interface. The SDM returns the appropriate
response:
• If AS x4 is available, the SDM grants the request by responding OK.
• If the SDM is in the process of configuring the device or AS x4 is in use, the SDM returns the error
response.
Description
• Upper 16 bits: Major error code.
• Lower 16 bits: Minor errors that do not contain meaningful data.
The following major error codes are defined:
Major Error Code
0xF001
0xF002
0xF003
0xF004
0xF005
0xF006
0xF007
Version Contains the value of each of the soft functions, whether that function is on
an SDM pin.
Error location Contains the error location of the last failing image. Returns 0 for no error.
Error details Contains the error details of the last failing image. Returns 0 for no error.
, the Mailbox Client
*.asm.rpt) GET_DESIGNHASH
5. Remote System Update
UG-20205 | 2019.04.03
Description
BITSTREAM_ERROR
HARDWARE_ACCESS_FAILURE
BITSTREAM_CORRUPTION
INTERNAL_ERROR
DEVICE_ERROR
HPS_WATCHDOG_TIMEOUT
INTERNAL_UNKNOWN_ERROR
command returns
continued...
Send Feedback