Table of Contents
Advertisement
4.3 Displaying video and RGB-signals
4.3.1 Display in a window
•
On A
click the Start button on the taskbar and choose Run ... to display the Run dialog box.
RGUS
•
Enter video as the program to be opened and if necessary the options, described in the table below. In-
stead of the system default names as well the names defined in the switcher definition file can be inserted,
see section
4.3.2 Naming of video channels and video
•
The software video opens the video window. With a right click on the video window a dialog box for con-
trolling the video display can be opened. The appearance and functionality of this dialog box depends on the
input card that provides the data source of the video that was started, please refer to the following sections
below for a detailed description of the operation of the various source types. S
sources must be configured before streaming video is shown. If video does not show up please refer also to
section
8.2 Other faults
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
for troubleshooting.
sources.
__________________________________________________________________________
4. Operating
Figure 4-2
Starting the video software
V
C
and its
TREAMING
IDEO
ARDS
Figure 4-3
Video window and dialog box
4-7
Advertisement
Table of Contents
