Installing Utilities Only - Kyocera ECOSYS P6035cdn Printer Driver User Manual

12
13

Installing Utilities Only

1
2
3
4
Printer Driver
During the installation, you can expand or collapse the installation detail by
clicking the arrow. When the installation completes successfully, on the
Finished page you can select from the following options. These options only
appear after a printer driver installation.
Print a test page
Select the check box to test the connection and operation of the printing system.
If the installation is successful, the Windows Printer Test Page, containing your
computer name and information on your printer driver and port settings, prints at
the newly installed printing system.
Device Settings
Select the check box to open Device Settings where you can choose installed
options for your printing system. (The Device Settings check box appears only
in Windows XP with a network connection.)
Enable event notification
Select the check box to enable event notification in the Status Monitor
Notification dialog box. The Status Monitor Notification dialog box appears
after clicking Status Monitor on the Advanced tab.
Show Quick Print tab
With Quick Print you can define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in Device
Settings > Administrator > General.
Click the plus sign to expand the list of options:
The Set Quick Print tab as default option makes the Quick Print tab the
first tab you see when you open the driver.
The Set Basic tab as default option makes the Basic tab the first tab you
see when you open the driver.
The Hide other tabs option makes the Quick Print tab the only tab in the
driver.
To exit the installer application, click Finish.
A message may appear if there is a software installation failure. After clicking
Finish, retry the installation. If the same message appears again, contact your
system administrator.
The installation of the printing system is now complete. If prompted, restart your
computer.
Ensure that your printing device and computer are turned on and connected by
USB or network cable.
In the Product Library window, click Custom Install.
Select a utility from the Utilities list, and click the arrow to move it to the
Products to Install list. If a more recent version of a utility is installed, the utility
is disabled in the list and shows a message that a newer version is installed.
If you want to remove a product from the Products to Install list, select it and
click Remove at the bottom of the list box. To remove all products, click
Remove all.
Installation
1-6