Toro Outcross 9060 Service Manual page 63

TRACTION (example): (continued)
Outcross 9060
18234SL Rev B
the parking brake switch is OFF. If the output reading is appropriate and the
vehicle does not perform correctly, the solenoid valve SV3 or its circuit wiring
may be faulty and should be tested.
•
Setting the mode selector to H then L or A should toggle RANGE HI ON and
OFF. If the output reading is appropriate and the vehicle does not perform
correctly, the solenoid valve SV1 or its circuit wiring may be faulty and should
be tested.
•
When the engine is running and the vehicle is stationary, switching the parking
brake switch ON and OFF toggles the PBRAKE DISENGAGE ON and OFF. If
the output reading is appropriate and the vehicle does not perform correctly,
the solenoid valve SV2 or its circuit wiring may be faulty and should be tested.
•
Switching the parking brake switch ON and OFF toggles the PBRAKE LIGHT
ON and OFF. If the output reading is appropriate and the vehicle does not
perform correctly, the parking brake switch light or its circuit wiring may be
faulty and should be tested.
Page 3–25 Troubleshooting: Attachment/Loader Problems