Toro Outcross 9060 Service Manual page 146

After Repairing or Replacing the Components (continued)
Hydraulic System: Service and Repairs
(page 5–8) and Installing the Hydraulic Fittings (SAE Straight Thread O-Ring
Fittings) (page 5–10).
5. After you complete the repairs, check the control linkages or cables for
proper adjustment, binding, or broken parts.
6. Whenever hydraulic fluid has been drained from the pumps (system drain,
flush, or pump removal/installation) it is important to properly prime the
hydraulic pumps, refer to
7. After you disconnect or replace any hydraulic component, operate the
machine functions slowly until the air is out of the system; refer to
the Hydraulic System (page
8. Check for hydraulic-fluid leaks. Shut off the engine and repair leaks if
necessary.
Priming the Hydraulic Pumps (page
5–59).
Page 5–50
5–58).
Charging
Outcross 9060
18234SL Rev B