Toro Outcross 9060 Service Manual page 92

Removing the Engine (continued)
g250065
1. Fusible link
2. Bracket – front left (for machines
without air conditioning shown)
3. Flange nut (10 each)
4. Bracket – front right
5. Lock washer (8 each)
6. Cap screw (8 each)
Engine: Service and Repairs
7. Cap screw (8 each)
8. Engine mount – front (2 each)
9. Snubbing washer – front (2 each)
10. Bolt – front (2 each)
11. Flange-head screw
12. Wire harness bracket
22. Remove lock nuts, snubbing washers and cap screws securing the engine
mounts to the engine brackets.
Use 1 person to operate the lift or hoist while the other person
guides the engine from the machine.
Figure 15
13.
14.
15.
16.
17.
18.
CAUTION
Page 4–20
Bolt – rear (2 each)
Snubbing washer – rear (2 each)
Engine mount – rear (2 each)
Flange nut (2 each)
Wire harness bracket
Cap screw
Outcross 9060
18234SL Rev B