Outcross 9060
18234SL Rev B
3-Point Hitch Position Sensor Tool
Toro Part No. 133–7818
Use to align 3-point hitch position sensor
with the lift arm pivot shaft when installing
the sensor.
1.
Thread sensor shaft into lift arm pivot
shaft until it bottoms out.
2.
Turn sensor shaft out until it aligns
with tool.
3.
Lock sensor shaft in position with jam
nut.
Spring Compression Tool
Toro Part No. 138–3968
Use with a press to relieve PTO clutch
piston spring load during PTO clutch
service.
1. Sensor tool
2. Sensor shaft
3. Jam nut
Page 2–19
Specifications and Maintenance: Special Tools