Fuse Identification, Location and Function (continued)
Testing Fuses
Electrical System: Electrical Component Testing
g257658
1.
Fuse – RH tail light
2.
Fuse – RH brake/turn
Optional Road Light Kit Wire Harness
• Four (5 Amp) fuses are integrated into the optional turn signal/hazard wire
harness. Each fuse is in a separate covered fuse holder. The harness is located
under the roof.
1. Make sure that key switch is OFF and key is removed from switch.
2. Remove fuse from fuse block for testing. Fuse should have continuity across
the terminals.
Figure 76
(shown with roof removed)
3.
Fuse – LH brake/turn
4.
Fuse – LH tail light
Page 6–16
Outcross 9060
18234SL Rev B