Toro Outcross 9060 Service Manual page 328

Removing the Operator's Platform (continued)
Chassis: Service and Repairs
g255072
1. Engine ECU
2. Engine wire harness connector
3. Frame wire harness connector (blue ring)
9. Disconnect the engine wire harness from the engine ECU.
10. Separate the operator platform wire harness from the frame wire harness at
the 2 connectors (under the right side of the dash cover).
11. Disconnect the 3–pin engine wire harness connector P63 from the main
harness.
12. Disconnect the 7–pin engine wire harness connector P18 from the main
harness.
Figure 136
4. Frame wire harness connector (green ring)
5. 3–pin engine harness connector P63
6. 7–pin engine harness connector P18
Page 8–8 Outcross 9060
18234SL Rev B