Machine Setting- Select Lens Page - GCC Technologies LaserPro Spirit Series User Manual

Machine Setting- Select Lens Page

The Select Lens Page allows you to modify the lens settings after you have changed to a different
focal lens. Remember to save your settings after you have made the proper changes. After that,
pressing the Auto Focus button on control panel, the laser machine will conduct auto focus
accordingly using the new lens setting.
GCC LaserPro Spirit series machine include different models which equipped different laser tubes,
make sure the laser tubes installed with your machine before making adjustment.
• CO2 Laser Focal Lens: 1.5"/ 2.0"/ 2.5"/ 4.0" (Default 2.0")
• Fiber Laser Focal Lens: 2.0"/ 4.0" (Default 4.0")
• CO2+Fiber Hybrid Laser Focal Lens: 3.0"
Go to Chapter 7.3 for different lens detailed information.
86
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Machine
Setting>from the menu
Machine Setting Page
Select<Select Lens>
from the menu
Set Lens Page
232001290G(13)