Enhanced Vector Mode (Advanced Page); Drilling (Advanced Page); Use Cluster (Advanced Page) - GCC Technologies LaserPro Spirit Series User Manual

Enhanced Vector Mode (Advanced Page) [DEFAULT SETTING: Unselected]
This setting allows you to improve the cutting quality at the expense of speed. Your engraving
speed will be dropped by 50%, to maximize the cutting power. We recommend that you enable
this function when cutting thicker materials.

Drilling (Advanced Page)

The drilling function is available only for use with AutoCad. Users can insert dots from AutoCad's
tool bar and use the drilling function to set the drilling time required to create holes.
Use the default "dot" tool ( ) from the tool bar to create dots which will be interpreted as drilling
locations.
Use the adjusting bar on under the "Drilling" function to set the drilling time (spot delay) required.
The size of the drilled hole can be adjusted by deploying a longer or shorter drilling time.
Use Cluster (Advanced Page) [DEFAULT SETTING: Unselected]
This setting allows you to change how the Spirit interprets and processes individual /
independent areas of an image in order to minimize job-processing times. The Cluster function is
only applicable when multiple areas of an image are broken down and isolated from each other
(areas not touching each other, blank space in-between). Another condition that must be met for
the Cluster function is that these individual areas of your design must have some X-axis overlap,
meaning that they should be to some extent side-by-side with empty spaces between them. The
127 232001290G(13)