Defocus; Bridge Cutting; Spirit Series Print Driver >> Advanced Page - GCC Technologies LaserPro Spirit Series User Manual

This checkbox sets the Auto Focus for that particular job. With the Auto Focus button checked,
the Spirit will automatically initialize the auto focus procedure before starting the job. This will
ensure the focal distance is properly set based on the particular material you are working with
and the focal lens you have installed.
Defocus (Pen Page) [DEFAULT SETTING: Unselected]
This checkbox enables users to set the Defocus or out of focus distance for a particular job. With
the Defocus button checked, the Spirit Series will use the entered focus distance when
performing the auto focus procedure before starting the job. This feature allows users to use out
of focus engraving techniques when working with different types of materials. Note that the
Defocus distance is set by the different pen colors.
Bridge Cutting (Pen Page) [DEFAUL T SETTING: Unselected / 0.0 mm]
Checking the Bridge Cutting checkbox will allow users to easily create perforation lines
(dash-line). Once seethe line color along with another corresponding pen can be used in
tandem to indicate the length of the gap and the uncut part of a perforation line. (If Pen 1 is
selected for bridge cutting, Pen 9 will be reserved to the length of the connected lines of the
perforation. If Pen 2 is selected, Pen 10 will be reserved and so on...)
5.2.3.3 Spirit Series Print Driver >> Advanced Page
123 232001290G(13)