Vector And Raster; Hybrid Laser Engraving, Cutting, Marking (Only For Spirit Gls Hybrid With Dual Lasers Configuration) - GCC Technologies LaserPro Spirit Series User Manual

1) With the text function, create a string of characters and select those characters by clicking on
the text.
2) Change the text fill color of the selected characters to white by left clicking on the white color
from the CorelDRAW Color Palette (located on the right hand side of the screen)
3) Change the outline color of the selected characters outline by right clicking on the desired
color from the CorelDRAW Color Palette.
4) Change the selected characters outline thickness to the thinnest width by right clicking on the
selected text select <Properties> → Click on the <Outline> tab and change the Width to its
thinnest dimension. Click on "OK" to apply the changes.
5) Now your string of characters has been properly designated as an area to be vector cut.
Simply "print" your job (output the file to the Spirit Series) and watch as your string of
characters is vector cut.

6.3 Vector and Raster

In some cases, you will want to process both raster engraving and vector cutting tasks within a
single project. For example, if you wanted to engrave a design onto a particular material and then cut
a particular shape around that engraving. The picture below is an example of engraving on a piece
of leather which has then been cut out: The picture below is an example of an engraving on a piece of
cork, which has then been cut out with a square shape:
In these situations when there are raster engraving and vector cutting operations on a single project,
the LaserPro Spirit Series driver will interpret between raster sections and vector sections by the
types of lines and line widths of your design. Areas of your design with line widths set between 0.001"
(0.025 mm), 0.004" (0.1 mm) will be designated for vector cutting, and the other areas will be
designated for raster engraving.
6.4 Hybrid Laser Engraving, Cutting, Marking
dual lasers configuration)
Spirit GLS Hybrid model with dual lasers configuration can process engraving, cutting, and marking
on organic materials and metals.
then Spirit GLS Hybrid machine will automatically switch different laser source between jobs. Here we
use a knife as an illustration.
Specify different laser type to different Pen No. on GCC print driver,
140
(only for Spirit GLS Hybrid with
232001290G(13)