Select And Configure A Communications Port - GCC Technologies Elite XL-20/600 User Manual

8.
Select the driver for the model you are installing.
9.
You will see a progress box. After a few seconds, the printer software is in-
At this point you must give the printer a name, and, optionally, enter a description. If
the printer is on a network, the description could be its location.
10. Go on to Section 2.

Select and configure a communications port.

You must now select and configure a port. A port can be either a parallel port (also
called an LPT port), a serial port (also called a COM port), or you can select a
network queue.
Printing using a serial port is very slow compared to using a parallel port or a net-
work.
1.
5 - 4 • Using Windows NT 3.51
If necessary, select a driver.
Click OK.
stalled, and you will see the Create Printer window again. This time it
shows the driver for your Elite XL 20ppm printer.
Select a port from the Print to drop-down list box.