Cleaning The Exhaust Duct - GCC Technologies LaserPro Spirit Series User Manual

8.4 Cleaning the Exhaust Duct

Efficient exhaust ventilation is crucial to laser cutting quality. We suggest you to clean the Exhaust
Duct from accumulated dust regularly will help to maintain the ventilation efficiency of your laser
engraving system.
Step 1. Remove screws fixing the rear door panel of laser machine
Step 2. Remove screws securing exhaust duct on rear door panel
Step 3. Open the rear door and take out the exhaust duct to clean with water
Step 4. Fix and secure the exhaust duct and rear door panel back to the laser machine
189
Remove screws securing
rear door and exhaust duct
Take out the exhaust duct
and clean with water
232001290G(13)