Spirit Series Print Driver >> Stamp Page - GCC Technologies LaserPro Spirit Series User Manual

5.2.3.7 Spirit Series Print Driver >> Stamp Page
Producing stamps require different operational steps than your standard engraving or cutting
jobs. The Stamp page offers dynamic options allowing you to customize your stamp production
process.
Noted Stamp function is only suitable for CO2 laser system (Spirit, Spirit LS, Spirit GLS, Spirit
GLS Hybrid CO2 models), not suitable for Spirit GLS Hybrid fiber laser, and CO2/Fiber dual
lasers configurations.
NOTE
The Stamp page will only appear and be accessible when you have selected the
Stamp Mode from the Options Page.
T ip
Functions located on the other pages that are useful when making a stamp: Set
Shoulder, Pitch, Border, Invert, and Mirror.
Pitch (Stamp Page)
Your stamp will be a reversed image composed of engraved depressions and ridges. Think of
these ridges as the "contact sections" of the stamp. If the ridges of these contact sections are too
Slope of bridge (shoulder level)
136
Bridge: contact area of the
stamp
Base of bridge (pitch)
232001290G(13)