Raster / Vector (Pen Page); Fiber Laser (Pen Page); Freq (Pen Page); Waveform - GCC Technologies LaserPro Spirit Series User Manual

Raster / Vector (Pen Page) [DEFAULT SETTING: Selected]
Checking the Raster checkbox will process only the raster functions for the areas of your design
that correspond to that particular "pen" color.
Checking the Vector checkbox will process the vector functions for the areas of your design that
correspond to that particular "pen" color.
As an example: a particular "pen" color may be assigned to areas in your design containing color
fills (raster engraving) and very thin lines (vector cutting). By checking / unchecking the Raster
and Vector will force the driver to process / ignore the color fills / thin lines.
Processes both Vector and Raster
Raster Checked functions for that particular color
Processes only the Vector functions
Raster
for that particular color (Raster
Unchecked
functions ignored)
Fiber Laser (Pen Page) [DEFAULT SETTING: Unselected]
model)
You can assign Pen to apply different laser tube for Spirit GLS Hybrid model, CO2 laser as the
default, by selecting "Fiber Laser" option to switch the corresponding Pen No. to apply fiber laser.
Only when assign the specified Pen to Fiber Laser, the related fiber laser settings, ie. Freq. and
Waveform can be adjusted for that Pen.
Freq (Pen Page) [DEFAULT SETTING: 30]
Freq (frequency) determines the peak power of the laser which affects the color variation and depth
of the laser marking. A lower frequency will produce a deeper marking.
slider to the experiment the output.
Notice to select "Fiber Laser" for the corresponding pen No. first before adjusting fiber laser related
parameters like Freq. and Waveform.
Waveform (Pen Page) [DEFAULT SETTING: Unselected]
model)
GCC Fiber Laser is equipped an unique Waveform function to give users greater control over laser
pulse parameters that can lead to more efficient and effective processing. An example would be the
use of low repetition rate, high-energy pulses to rough out and remove the bulk of the material while a
higher frequency shorter pulse with less energy can subsequently be used in a polishing pass
yielding a better surface finish.
Vector Checked
121
Vector Unchecked
Processes only the Raster functions for
that particular color (Vector functions
ignored)
Does not process Vector or Raster
functions for that particular color
(only for Spirit GLS Hybrid
(only for Spirit GLS Hybrid model)
(only for Spirit GLS Hybrid
You can drag the Freq.
232001290G(13)