Machine Setting- Table Down Page - GCC Technologies LaserPro Spirit Series User Manual

Machine Setting- Table Down Page

The Set Table Down Page allows you to select whether or not the LaserPro Spirit Series displays
a table moving down warning message at startup. If the Table Down selection is set to <YES>, the
LaserPro Spirit Series will display a warning message at startup stating: "Table will move down
and remove objects on table". Pressing the Enter key at this point will confirm the prompt to move
the work table to its lowest position. If the Table Down is set to <NO>, the LaserPro Spirit Series
will not display the warning message at system startup.
• Table Down: YES/ NO
• Distance: 0 - 165 mm (165mm for Spirit, Spirit LS models, and 177mm for Spirit GLS Hybrid
model)
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
Table Down Page
Back to previous page
Save your current settings
Scroll through the menu selections
Adjust the value for that selection
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
89
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Machine
Setting>from the menu
Machine Setting Page
Select<Ta bl e D own >
from the menu
Table Down Page
Function
232001290G(13)