Introduction To Software For 3D Graphic Production; Laser Professional Ap - GCC Technologies LaserPro Spirit Series User Manual

By specifying the degrees of the gray level in this way, various energy output is achieved and the 3D effects are
produced.
By specifying different levels of black in design software, the corresponding laser power energy
will generate different depths of engraving result.

Introduction to software for 3D graphic production

Many ways to produce 3D graphics are available. If you are familiar with or frequently use one of the 3D software in
the market like Laser Type, EngraveLab, 3D Studio etc., you may use it for the production of 3D graphics. After
completion, save the 3D images as one of the formats that is compatible with the Laser Engraver (such as JPG or
BMP) and let the machine begin the engraving. If you are not familiar with any 3D software, some editing software
specific for laser in the market also have 3D mode functionality, which could be a handy tool for you to produce 3D
objects. Of course, you may also use Photoshop or CorelDRAW, which you might be using on daily basis, for the
production of 3D objects. Ways to produce 3D graphics with these software are not the same. In the following
section, we will give you simple illustrations with respect to how these software work.

Laser Professional AP

Currently, quite few laser professional application softwares like Laser Type, 3D studio, EngraveLab are available
in the market. You can not only create all kinds of vector images with these AP but also convert these vector
images into 3D module, which is a great way to produce 3D graphics.
As illustrated in the figure below, all you need to do is to choose the direction of the vector and then set the length
and shape of the convex or concave surface. The software will automatically generate the 3D graphic for you.
143 232001290G(13)