Adjustment Bar/ Power Level - GCC Technologies LaserPro Spirit Series User Manual

thin, they may break. The Pitch setting allows you to increase the width of the ridge base, hence
creating more stable "contact sections" and longer lasting stamp. The pitch value setting allows
you to adjust the base width of the ridge.
each ridge. Experiment with different pitch value settings in order to produce the stamp that is
best suited for your application.
Adjustment Bar/ Power Level (Stamp Page)
Another important aspect of creating a stamp is setting the slope level of the shoulder. The
shoulder is the section from the "contact section" of the stamp to its base. This function allows
you to adjust the slope for the shoulder sections of your stamp. By sliding the sliders or directly
input of power levels, you will be able to change the slope of the shoulder.
NOTE
The visual representations of the Pitch and Shoulder Levels in the Spirit Series driver
are an exaggerated representation to allow for easy visual guidance and precise input.
Remember we are working with distances less than 1 mm here.
Broad pitch gives the maximum amount of support for
137 232001290G(13)