Machine Setting- Others Page; Others Page - GCC Technologies LaserPro Spirit Series User Manual

Machine Setting- Others Page

The Others Page allows you to change various settings that correspond to the control panel. The
Language setting will allow users to change available languages displayed on the control panel.
The Unit setting will allow you to change whether the units displayed by the control panel is in the
metric or imperial system. The EOF (end of file) Alarm setting will enable or disable an audible
notification when jobs are complete. The Air Delay setting allows you to specify the delay in
seconds of the SmartAIR air-assist after the point of laser firing.
• Language: ENGLISH (others dependent on Firmware)
• Unit: METRIC/ INCH
• EOF Alarm: YES/ NO
• Air Delay: 1-100 seconds
T ip
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
Depending on the material you are working with, your laser settings, and the
desired results, please experiment with the air delay to achieve your desired
results.

Others Page

Back to previous page
Save your current settings
Scroll through the menu selections
Adjust the value for that selection
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
101
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Ma chin e
Se tting
Machine Setting Page
Select<O th e rs >
from the menu
Others Page
Function
232001290G(13)
>from the menu