Directional And Selection Buttons - GCC Technologies LaserPro Spirit Series User Manual

Directional and Selection Buttons

Function (F1 / F2 / F3 / F4) – Four function buttons allow you to select various functions which
will change depending on what section of the menu you are in. Each function button's
corresponding task will be displayed right above its respective button on the LCD display
screen. Please note that in certain menus, not every function button will always be mapped to a
corresponding action. In these situations, that particular button will not have a function.
Directional ( /
cursor through the control panel menu and adjust the value of specific settings. In general, the
/ directional buttons cycle through the various selections, while the
buttons adjust the value of that particular selection.
Enter – Confirms the current selection.
Start / Stop – Allows you to start or stop engraving jobs, once those jobs have been
successfully loaded onto the system.
Delete – Provides quick access to delete the current job.
Pause – Pauses the current engraving process. Press again to resume the current process.
Auto Focus – After you have positioned your material and moved the lens carriage head to the
area you want to engrave, press this button and the system will automatically adjust the optimal
vertical focal distance for the laser.
Manual Focus ( /
and the material, you can use the
height (z-axis) of the worktable.
NOTE
There is an 8-second warm up period after the door LED is triggered for systems
equipped with Synrad laser tubes. i.e. opening the top lid or the external pass through
doors of the machine. Operator must wait for 8 seconds before the laser tube can
begin to work.
/ / ) – Four directional buttons allow you to navigate the selection
) – To manually adjust the vertical focal distance between the laser head
/
72
buttons to do so. Doing so will adjust the vertical
/ directional
232001290G(13)