3D Tips; Principle For 3D Production By Laser - GCC Technologies LaserPro Spirit Series User Manual

Step 3. Print the file from print driver to Spirit GLS Hybrid machine.
Step 4. Manually move the lens carriage of laser machine to where wants to processed by CO2
laser and press AutoFocus button on control panel.
Step 5. Press START button on control panel to begin laser jobs.
Step 6. The lens carriage will move to holder of knife for Pen 1 (CO2 laser) processing, and move
to blade section to do AutoFocus again then start Pen 2 (Fiber laser) processing.

6.5 3D Tips

3D Mode is one of the functions of GCC CO2 laser engraver. Instead of traditional two dimensional graphic
processing, 3D Mode allows the naked eyes to visualize the curvatures of the 3D effect by applying 200 power
levels technology to create different depth of engraving. Although it is easy to produce 3D samples with LaserPro
Engraver, production of the 3D graphic can be a hassle for our users.

Principle for 3D production by laser

3D processing uses degrees of the gray level to adjust the output energy of the laser. Take the figures below as an
example. When the color of a certain block is set as 100% black, the laser output energy for processing will be at
100%. The processing depth will be fairly deep. When the gray level is set as 50% black, the laser output energy
will be adjusted to a smaller value accordingly so that the processing depth is not as deep.
142 232001290G(13)