Fume Extraction Unit - GCC Technologies LaserPro Spirit Series User Manual

Several optional items are available to enhance your experience with the Spirit Series system. If
anytime after the purchase of your Spirit Series, should you ever consider to purchase any optional
item, please contact your local authorized GCC distributor.

7.1 Fume Extraction Unit

To properly remove dust, vaporized materials and chemical smoke from the working area and machine,
it is necessary to install a suitable air extraction system. The air extraction system and other
components are readily available from your local authorized GCC distributor or you can elect to
purchase and install one yourself with components found at your local industrial supply store.
LaserPro's Fume Extraction Units are specifically designed to prevent personnel from inhaling
hazardous fumes and dust generated by the laser process. Available for all LaserPro engravers, the
LaserPro Fume Extraction Unit represents the latest in exhaust extraction and odor reduction
technology for all types of applications. Quiet operation, high vacuum capacity, compact design and
long life expectancy are but a few outstanding features.
powered by a maintenance-free, continuous-running turbine. In order to ensure personnel safety and
legal compliance, the LaserPro Fume Extraction Unit is CE-compliant for Europe. To purchase a
LaserPro Fume Extraction Unit, contact your local authorized GCC distributor.
INSTALLATION (Self-Assembled Unit):
1) If you purchase an exhaust system at your local industrial supply store, we suggest that you
have a contractor install the exhaust system. We highly recommend you to install the exhaust
system outside of the building for both noise considerations and if it does not possess filtering
capabilities.
2) Mount the fume ventilation system in an obvious and accessible location, not too far from the
GCC LaserPro machines, so it can be routinely switched on prior to laser engraving. The
maximal distance you should mount the exhaust system away from the Spirit Series depends
on the blower's vacuum capacity. We recommend that you consult with the vendor regarding
the unit's vacuum force, maximal distances, based on the available models.
3) Connect rigid and smooth walled tubing such as PVC or sheet metal with a 4" diameter to the
ventilation opening located on the rear side of GCC LaserPro machines. (As shown in the
picture below). Try to keep this tubing as straight as possible as bends reduce the exhaust
efficiency. Use the appropriate sized tube clamps and sealants to ensure a tight and secure
attachment.
4) There are two exhaust openings on the rear side of GCC LaserPro machines, you can connect
the top or bottom one, or both for application requirements. The top ductwork is suitable for dust,
smoke generated on material surface when doing laser engraving, which will reduce residue
left on material surface; while the bottom ductwork is recommended for laser cutting jobs.
Optimum down vacuum is critical for clear cutting edge when laser cutting materials.
Each LaserPro Fume Extraction Unit is
156