GCC Technologies LaserPro Spirit Series User Manual page 189

4) Loosen the thumbscrew securing mirror #1.
4) Clean the mirror in the proper manner.
5) Place the mirror back to the optics holder after cleaning.
6) Tighten the thumbscrew.
7) Close and secure all the covers.
For Spirit GLS Hybrid machine equipped with dual laser tubes (CO2 laser tube and Fiber laser
tube), in addition to above mentioned process to access and clean mirror #1, there is an extra
mirror #1 for fiber laser module needs maintenance.
1) Open slot cover located at bottom left side of the machine
2) Loosen the thumbscrew and remove the black dust cover in front of laser tube.
3) Loosen the thumbscrew secured the mirror #1.
4) Clean the mirror in the proper manner.
5) Place the mirror back to the optics holder after cleaning.
6) Tighten the thumbscrew.
7) Close and secure all the covers.
185
Thumbscrew
232001290G(13)