File Edit Vector Page - GCC Technologies LaserPro Spirit Series User Manual

File Edit Vector Page

The File Edit Vector Page allows you to edit the vector pen, vector power, vector speed, and
vector PPI, and power ramp settings for the selected job. These settings correspond to the same
settings found on the LaserPro Spirit Series print driver. This page allows you to easily adjust
these values to make immediate adjustments while processing your loaded jobs, even when you
have disconnected your computer from the LaserPro Spirit Series.
• Vector Pen: 1 - 16
• Vector Power: 0.0% - 100%
• Vector Speed: 0.0% - 100%
• Vector PPI: 30 - 1524
• Power Ramp: YES/ NO
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
File Vector Page
CorelDRAW
Back to previous page
Save your current settings
Scroll through your loaded jobs
Adjust the value for that selection
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
83
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<File Manage-
ment>from the menu
File Management Page
Select a job file and
press E nt e r
File Information Page
press F4
File Information Page
Select< Ve ctor Se tting >
from the menu
File Edit Vector Page
Function
232001290G(13)