Smartguard Fire Alarm Option - GCC Technologies LaserPro Spirit Series User Manual

7.6 SmartGUARD Fire Alarm Option

Laser cutting and engraving operations using the SmartGUARD device protects the operator,
machine, produced and the work products from potential fire hazards. During the engraving process,
flames may be produced when working with combustible or easily-flammable materials, such as paper
or wood. The SmartGUARD is an optional item that can be set to notify the operator through audio
warnings and automatically shut down the laser firing as a safety precaution.
Note that SmartGUARD fire alarm is an fire detecting and alarm system, not a fire extinguisher.
INSTALLATION:
If you have purchased your system with SmartGUARD, then no installation is required, as your
system will arrive with SmartGUARD pre-installed.
For system owners that did not initially purchase this option, but would now like to add the
SmartGUARD, they will need to contact your local authorized GCC distributor to have this great
feature installed.
1. Lift the SmartLID using the handles.
2. Remove the protective cover
SmartLID™ Handles
Y motor PCB
Protective Cover
174 232001290G(13)