Smartbox Cutting Accessory - GCC Technologies LaserPro Spirit Series User Manual

7.4 SmartBOX Cutting Accessory

The SmartBOX is an innovative combination of a cutting box, honeycomb table, and material support
stands. During the cutting and engraving process, unwanted scrap, dust, and vapor byproducts are
left behind. The cutting box collects the larger scrap byproducts while venting out the smaller dust
particles, vapors, and smoke to minimize excess buildup on the machine, worktable, and your project.
The SmartBOX allows you to maintain a clean worktable and minimizes backside burning of your
media, whether you are working with thick and firm materials or thin and flexible materials.
It is highly recommended that you use different setups of the SmartBOX depending on the physical
properties of the material you will be working with. Here is the recommended SmartBOX component
setups based on your working material.
Component
Application
T hin , F l e xibl e Ma t e ri a ls
T hick , F irm Ma t e ri a ls
Action
Engraving
Light cutting
Thick cutting
Thin textile/fabric module
H on e ycomb Ta bl e/
C utting Box
Required
Required
Suggestion setups
NO Smart Box
honeycomb table
Cutting box + Support
smart box
163
Aluminum Grid
Cutting Table
Required
Not Required
S upport
S t a nds
Not Required
Required
232001290G(13)