Safety Measures - GCC Technologies LaserPro Spirit Series User Manual

For Spirit GLS Hybrid with below model No.: GLS Hybrid-20RMZ, GLS Hybrid-30RMZ, GLS
Hybrid-50RMZ,
For Spirit GLS Hybrid with below model No.:
GLS Hybrid-30V/20RMZ, GLS Hybrid-30V/30RMZ, GLS Hybrid-30V/50RMZ, GLS Hybrid-40V/20RMZ,
GLS Hybrid-40V/30RMZ, GLS Hybrid-40V/50RMZ, GLS Hybrid-60Ti/20RMZ, GLS Hybrid-60Ti/30RMZ,
GLS Hybrid-60Ti/50RMZ, GLS Hybrid-80Ti/20RMZ, GLS Hybrid-80Ti/30RMZ, GLS Hybrid-80Ti/50RMZ,
GLS Hybrid-100TiF/20RMZ, GLS Hybrid-100TiF/30RMZ, GLS Hybrid-100TiF/50RMZ

1.5 Safety Measures

• LASER RADIA TION W ARNING: Exposure to laser radiation may result in physical burns and
severe eye damage. Proper use and regular maintenance of this machine is important to the
safety of all people in the immediate area.
• Prior to operation, carefully read and familiarize yourself with the warning labels located on both
your laser system and in this manual.
• Never leave the machine unattended during the laser cutting and engraving process. The laser
may ignite combustible materials. A well-maintained fire extinguisher and operational smoke or
fire detector should be kept in the vicinity of the machine.
• Caution—Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Resulting debris from laser cutting are very dangerous and may cause fire hazard.
DO NOT leave debris and scraps inside laser machine after job finished. Always keep machine
clean after job finished.
Resulting debris from laser processing are very dangerous and may cause fire hazard
DO NOT leave debris and scraps inside laser machine after job finished. Must keep
machine clean after job finished.
Always remove the vector grid to clean any small pieces that have fallen through the grid.
W A RNING
232001290G(13)
26