True Image Mode (Advance Page) - GCC Technologies LaserPro Spirit Series User Manual

distance value can be set by the user and represents the limit or cutoff point in which side-by-side
objects will be processed in Cluster mode or not. If the distance between side-by-side objects is
greater than the set distance value, then the individual areas will be processed in Cluster mode.
Conversely, if the distance between side-by-side objects is lesser than the set distance value,
then the individual areas will be processed normally (not via Cluster mode).
An example of an image that would benefit from the Cluster function would be: 2 squares to be
engraved, side-by-side on the X-axis with a 20 cm gap in between them. In this scenario, you
would want to enable the Cluster setting and set the distance to a value less than 20. By doing so,
the laser will completely process one square and "leap-frog" to the second square, rather than
processing both squares simultaneously. The resulting processing time is minimized by
eliminating the unnecessary travel distance the laser head needs to make across the X-axis in
between squares, if they were to be processed simultaneously.
NOTE
If you wish to use the Border and Cluster function simultaneously, then the Border
Thickness value must be less than the Distance value specified in the Cluster setting.
True Image Mode (Advance Page) [DEFAULT SETTING: Unselected]
This setting allows you to improve the engraving quality by reordering the line by line output
sequence and by doing so masking the banding problems. This feature is only suitable for
engraving large sized graphics. Note: The overall working time will be increased.
True Image is a function that will shuffle the normal engraving sequence to produces a nicer
engraving output by reducing possible banding occurrences.
128 232001290G(13)