Parallels Desktops For Mac Users - GCC Technologies LaserPro Spirit Series User Manual

Hide thumbs Also See for LaserPro Spirit Series:
Table of Contents

Advertisement

of the print driver. With the LaserPro CD still in your drive, click Brows e, select the LaserPro Spirit
driver folder and locate the GL345.inf file. Click OPEN to have Spirit displayed as a valid printer.
7)
Now select Spirit from the list of printers (Spirit should be the only printer displayed on the
list) and click Ne xt to continue.
8)
If a screen comes up informing you of the detection of a previous driver and asks to keep
the existing driver or use the new one, select <Re pl a c e E xisting D riv e r > and click Ne xt to
continue.
9) This screen will prompt you to provide a printer name. Simply type in <S pirit > and select
Ye s or N o if you want to use this printer as the default printer and click Ne xt to continue.
NOTE
When working with the LaserPro Spirit Series Print Driver within your graphics software,
you will need to have the Spirit set as the default printer to get proper output. If you
select to not have the Spirit be the default printer, please remember to manually change
this
on your own from within the graphic software printer selection area or from the Windows
Control Panel
10)
At the Printer Sharing screen, select <D o not sh a r e this print e r > and click Ne xt to continue.
11)
Select <N o > when asked if you want to print a test page and click Ne xt to continue.
12)
Now simply click F inish to complete the Add Printer Wizard.
13)
Now the installation will proceed, if you get a Hardware Warning about the software you are
installing for this hardware has not passed Windows Logo testing, simply click C ontinu e
Anyw a y to ignore this warning.
14)
Congratulations, your printer driver has been successfully installed!

4.4 Parallels Desktops for MAC Users

MAC users can use GCC LaserPro machines by purchasing the Parallels Desktop software which allows
you to install Windows OS in MAC computers and run Windows based software under MAC computer and
output with GCC print driver.
1) Purchase Parallels Desktops on its official website.
2) Install Parallels Desktops under Mac OS environment.
Printers and Faxes section.
58
232001290G(13)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laserpro spirit si-20v93Laserpro spirit si-25Laserpro spirit si-12Laserpro spirit si-30vLaserpro spirit si-40vLaserpro spirit si-40c ... Show all

Table of Contents