Machine Setting- Tune Auto Focus Page - GCC Technologies LaserPro Spirit Series User Manual

Machine Setting- Tune Auto Focus Page

The Tune Auto Focus Page allows you to manually adjust the auto focus default value, or distance
from lens carriage to the worktable (Z-axis) when the Auto Focus button is pressed.
GCC LaserPro Spirit series machine include different models which equipped different laser tubes,
make sure the laser tubes installed with your machine before making adjustment.
Relevant Buttons
F1 (Back)
F4 (Save)
/ Directional
Start / Stop
Auto Focus
/ Manual Focus Buttons
Tune Auto Focus Page
Back to previous page
Save your current settings
Manually adjust the height of the work table (Z-axis)
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-axis)
88
Navigating to this page:
Main Work Page
press F4
Functions Page
Select<Machine
Setting>from the menu
Machine Setting Page
Select<Tune Auto
Focus>from the menu
Tune Auto Focus Page
Function
232001290G(13)